
Add to Cart
Rode Microphones Discussion Vote Condenser Microphone Conference Wired System
GMS-5100 series is designed for simpleconference room. Itis a highly stable conference system with easy operation
. Intelligent digital design control circuit, low power consumption.
. Touch the induction button to make the unit panel more integrated.
. High-fidelity unidirectional condenser microphone core, sound reproduction, high clarity and low noise.
. The delegate unit has the function of applying for speaking, and the order of the meeting is orderly and not chaotic.
. Excellent anti-interference ability from mobile phones.
. With internal magnetic high-fidelity speaker, it will automatically mute when the microphone is turned on,
and it is not easy to produce howling.
. The left side is designed with 2 3.5 audio output and input interfaces, and the access device can replace the conference
microphone to speak and listen to the content of other non-voting conference speeches.
. The conference unit supports hot-swappable function, comes with a 2.1-meter 8P cable, hand-in-hand connection mode,
easy installation and flexible operation.
. Metal base, durable, beautiful and fashionable, not fading or deforming.
Frequency Stability | ±0.001% |
S/N Ratio | >85 dBA |
T. H. D | <0.05% |
Sensitivity | SNR>60dB @25KHz, 6dBv. |
Power Supply | AC110-240V/50-60Hz |
Max Deviation Range | ±45KHz |
Frequency Response | 45Hz-18KHz±3dB |
Operation Distance | Conventional receiving range is 60 meters |
Output | RCA socket*2, 6.35mm *1 |
Installation methods | 19-inch standard cabinet |
Weight | 5.5kg |
Dimension | 483x323x90 mm |
Power Supply | DC 24v |
RF Power Output | 15mA-60mA |
S/N Ratio | >75dBA |
Frequency Response | 100Hz-12KHz |
Type | Condenser |
polar pattern | Cardioid |
Features
GMS-5100 Rear Panel
[1]. Power Socket
[2]. 6.3mm Earphone Jack
[3]. 6.3mm Audio Input
[4]. XLR Output
[5]. Aux RCA jacks
[6]. RS-232 Port for Central Controller
[7]. RS-232 Port for PC
[8] Microphone Unit Port
Microphone unit
. With detachable design for the MIC tube and MICbase.
. Adopt hyper cardioid-directional condensermicrophone, which can carry out high quality pick up.
. With LCD display. It can display signal, batteryPower ,ON/OFF, ID relevant key indication.
. With priority button for chairman unit,With red ring indicator shows the active unit, With hyper-cardioid directional capsule.
. Free from interference of mobile.
. LCD display , Detachable mic tube
Application
Ideally suitable for small scale boardrooms and meeting rooms, Large Meeting Room, Large lecture seminar.
The top panel of the Yeti X is covered in mesh metallic grille, behind which is the four 14mm capsule array. Below the grille, a multipurpose knob controls gain and headphone volume, with LEDs showing the levels for each. You can also use the knob to blend the level of computer audio and mic audio you hear in the headphones. Pressing the knob mutes or un-mutes the mic, and the LEDs act as a meter for levels when you're recording or streaming, which helps to avoid overloading the mic.Available in a black-and-silver design, the Yeti X is a four-capsule condenser, side-address mic that ships with a sturdy built-in desktop stand. With the stand connected, it measures roughly 11.4 by 4.3 by 4.8 inches (HWD) and weighs 2.8 pounds. The mic can swivel to be angled upward while in the stand, and it can be removed and used with a standard mic stand (an adapter is required, but not included).